![]() ![]() ![]() Quick heat recovery at 0.12☌ per minute allows a rapid return to set point temperature. Humidity recovers to 90 percent of original level 20-40 minutes after a 15-second door opening. The CO2 level and temperature recover automatically in approximately five minutes after a one-minute door opening. Temperature uniformity is maintained throughout the chamber with accuracy to within ☐.3☌. Specially designed dual temperature sensor probes continuously monitor and send information to the NuTouch ECS, making any needed adjustments. Optimum uniformity is achieved through the use of R5 insulation-wrapped foil heating elements surrounding a 5.7 cubic foot growth chamber. Located in the sensor bay, this microprocessor-based IR sensor's wavelengths are specifically absorbed by CO2, making it impervious to input from other elements such as water vapor, allowing for a highly stable output and minimizing the need for frequent calibrations. Continuously monitor system status on the color screen while the incubator is in standby mode, making chamber adjustments or sampling air.Ī highly selective single source dual wave infrared (IR) sensor allows for incredibly sensitive and accurate CO2 control (within ☐.1%). Readily update the chamber environment with preset service settings. Quickly access system parameters such as set points and monitor temperature history and carbon dioxide graphs right on the screen (USB download capable). NuTouch (Touchscreen) Electronic Control System (ECS)Ī 5x7 inch (127x178 mm), standard on each In-VitroCell incubator allow users to easily view and control the system with the touch of a finger. Reducing vibration helps protect cell lines. The inner shelves and rails are easy to remove for sterilisation.įor product protection, the incubator has fewer moving parts, which means reduced vibration. ![]() This design, coupled with the fact that the highly polished stainless steel surface inhibits biological growth and is easily cleaned, helps prevent contamination. The interior of the direct-heat incubator is constructed of 16-gauge steel and is crevice-free and cove-cornered. The NU-5710 offer dual sterilization cycles - at 145☌ dry and 95☌ humidified. To protect laboratory personnel and the products in the chamber, the incubator is engineered to keep contamination to a minimum. An extremely sensitive sensor bay constantly monitors the chamber environment, making necessary adjustments to maintain consistency. To help prevent cell desiccation, chamber air cycles through one air change at 30-minute intervals. All gas and air are passed through 99.99% HEPA filters before entering the growth chamber, ensuring a sterile environment. Using the rigorous standards of an ISO Class 5 Clean Room's environment, the In-VitroCell™ CO2 incubators have been engineered to keep contamination to a minimum. Performance and Constant Contamination Control ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |